| |
The Synapse Rx-R (GPMA6000) can be ready for launch in under 10 minutes – and ready to impress the moment it hits the sky. It offers brushless power for breathtaking aerobatics, pre-installed, matched components, and a fresh look at what ducted fan jets will be. Also available as an ARF (GPMA1870).
- Comes with a complete brushless power system, including a high-efficiency HyperFlow ducted fan!
- Molded from ultra-light AeroCellTM foam, painted and decaled for instant use!
- Arrives with the power system installed and all flying surfaces pre-hinged!
- Sized right for grab n' go flying opportunities at lunch, after work and on weekends! Fly anytime. . . anywhere!
- Capable of brilliant aerobatics at high speeds and relaxing sport flying at low speeds.
- Also available as an ARF, ready for your choice of power system and radio gear.
An Rx-R is more than an ARF – it's a new level of pilot ease! The on-board gear below is included and installed. Add a receiver and battery – and you're ready to fly!
|
|
|
The HyperFlow ducted fan unit was designed by our engineering department using flow analysis and state-of-the-art computer modeling to identify the parameters for high performance. The result is the ultimate ducted fan design.
Blue color shown for illustration purposes. Production fan is molded in black.
|
 |
AeroCell may be the most ideal material ever created for electric aircraft. It's a closed-cell polyolefin composite that delivers the benefits of costly composite construction in a more pilot-friendly, easy-building form. AeroCell offers the structural strength and rigidity of traditional structures without building, the weight advantages of EPS foam without the brittleness and breakage – and a smooth, paintable surface that comes out of the box factory-finished and decaled.
|
The Synapse Rx-R can be flight-ready fast! Installing your receiver takes only minutes. The
SS-25 ESC and two Nano servos are installed – and the servo linkages are adjusted.
|
|
The HyperFlow ducted fan and Ammo inrunner brushless motor combination produces impressive thrust and speed. Factory installation adds ease that matches performance.
|
Added ease and all-out performance! Like the servo, the linkages and control horns are included and installed.
|
|
Push the throttle to the max for impressive high-speed passes upright – or inverted!
|
End rocketing climbs with blinding victory rolls!
|
|
It takes only a touch of the sticks to send the Synapse into soaring loops and rapid-fire rolls. Reduce throttle, and the Synapse settles into cruise mode for stable, easy sport flying.
|
Click here for a review by RC Universe
|
|
Download the Rx-R manual (387k PDF)
Download the ARF manual (379k PDF)
Download wallpaper for your computer
|
SPECIFICATIONS
Stock Number:
GPMA6000 (Rx-R Version)
GPMA1870 (ARF Version)
Wingspan: 26.5 in (665 mm)
Wing Area: 168 in² (10.8 dm²)
Weight: 12.5-13.5 oz (350-380 g)
Wing Loading: 10.7-11.6 oz/ft² (33-35 g/dm²)
Length: 24 in (590 mm)
Rx-R Requires: 3+ channel radio w/elevon mixing, 11.1V, 910-1250mAh LiPo battery and micro receiver
ARF Requires: 3+ channel radio w/elevon mixing and two nano servos, a 20-40-3500 inrunner brushless motor, 25A brushless ESC, 11.1V, 910-1250mAh LiPo battery and micro receiver |
|
Copyright © 2007-2009 Hobbico, Inc. Privacy Statement | Terms of Use
All rights reserved. Do not duplicate or distribute in any form. |
|
