TECH NOTES

BL-8 8 AMP Brushless Speed Control (GPMM2070)

The instruction sheet for the initial shipments of the ElectriFly BL-8 Brushless ESC failed to explain how to change the setting of the brake function in the programming. The following step should be performed after Step 7.C. in the instruction sheet:

D. BRAKE: To change the brake setting, simply pull the throttle stick to minimum within five seconds of hearing the programming tones noted in step C above. This will change the state of the brake setting - if the brake was on this will turn it off, and vice-versa. You can determine which setting is active by listening to the arming tone. One tone indicates that the brake is enabled, and two tones indicates that the brake is disabled. Skip to Step 8 if you do not wish to make any other programming changes. To CHANGE ANOTHER programmable feature disconnect the battery from the ESC and return to Step B above.