Connectors and Adapters
Jump To:
Adapters
Charge Leads
Connectors
Balance Boards
Equinox 2S/3S Adapter Set
Stock Number: GPMM3161
Usage: Replaces worn or damaged 2S and 3S adapters for the Equinox Cell Balancer.
Back to top of page
Equinox 4S/5S Adapter Set
Stock Number: GPMM3162
Usage: For connecting 4 and 5 cell LiPo packs wired for balancing to the Equinox Cell Balancer.
Back to top of page
Equinox 2S Adapter FlightPower (3)
Stock Number: GPMM3180
Usage: For charging or eischarging FlightPower and Thunder Power LiPos up to 3 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries
Voltage Range: 2S, 3S, 4S and 5S (7.4V, 11.1V, 14.8V, 18.5V)
Back to top of page
Equinox 3S Adapter FlightPower (3)
Stock Number: GPMM3181
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 3 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries
Voltage Range: 2S, 3S, 4S and 5S (7.4V, 11.1V, 14.8V, 18.5V)
Back to top of page
Equinox 4S Adapter FlightPower (3)
Stock Number: GPMM3182
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 3 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries
Voltage Range: 2S, 3S, 4S and 5S (7.4V, 11.1V, 14.8V, 18.5V)
Back to top of page
Equinox 5S Adapter FlightPower (3)
Stock Number: GPMM3183
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 3 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries
Voltage Range: 2S, 3S, 4S and 5S (7.4V, 11.1V, 14.8V, 18.5V)
Back to top of page
Equinox 2S Hi-Power Adapters FlightPower (3)
Stock Number: GPMM3185
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 6 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries which are wired for balancing only
Voltage Range: 2S (7.4V)
Maximum Current: 6A
Battery Power Connector: Deans Ultra Male
Back to top of page
Equinox 3S Hi-Power Adapters FlightPower (3)
Stock Number: GPMM3186
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 6 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries which are wired for balancing only
Voltage Range: 3S (11.1V)
Maximum Current: 6A
Battery Power Connector: Deans Ultra Male
Back to top of page
Equinox 4S Hi-Power Adapters FlightPower (3)
Stock Number: GPMM3187
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 6 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries which are wired for balancing only
Voltage Range: 4S (14.8V)
Maximum Current: 6A
Battery Power Connector: Deans Ultra Male
Back to top of page
Equinox 5S Hi-Power Adapters FlightPower (3)
Stock Number: GPMM3188
Usage: For charging or discharging FlightPower and Thunder Power LiPos up to 6 amps through the Equinox Cell Balancer.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries which are wired for Balancing only
Voltage Range: 2S, 3S, 4S and 5S (7.4V, 11.1V, 14.8V, 18.5V)
Maximum Current: 6A
Battery Power Connector: Deans Ultra Male
Back to top of page
2mm Male Bullet Adapter to JST Male Connector
Stock Number: GPMM3138
Usage: To connect a motor with a female JST Connector to an electronic speed control with 2mm female bullet connectors.
Specifications:
Maximum Recommended Continuous Current: 5 amps-limited to the JST connector
Connector #1: 2mm Male Bullet
Connector #2 JST Male (Terminal Gender: Male/Housing Gender: Female)
Wire: 20AWG
Wire Length: 1.8" (45mm)
Weight: 0.08oz (2.29g)
Back to top of page
2mm Female Bullet Adapter to JST Connector
Stock Number: GPMM3139
Usage: To connect a motor with 2mm Male Bullet Connectors to an electronic speed control with a JST Male Connector.
Specifications:
Maximum Recommended Continuous Current: 5 amps-limited to the JST connector
Connector #1: 2mm Female Bullet
Connector #2 JST Female (Terminal Gender: Female/Housing Gender: Male)
Wire: 20AWG
Wire Length: 1.8" (45mm)
Weight: 0.07oz (2g)
Back to top of page
Parallel Adapter 1 Deans Ultra Male to 2 Deans Ultra Female
Stock Number: GPMM3141 Usage: To connect two electronic speed controls with Deans Ultra Male connectors in parallel to a battery with a Deans Ultra Female connector.
Specifications:
Maximum Recommended Current: 60 amps
Connector #1: Deans Male Ultra
Connector #2: Deans Female Ultra
Wire: None
Weight: 0.31 oz (8.79 g)
Back to top of page
Parallel Adapter 2 Deans Male Ultra to 1 Deans Female Ultra
Stock Number: GPMM3142 Usage: To connect two batteries with Deans Ultra Female connectors in Parallel to an ESC with a Deans Ultra Male connector.
Specifications:
Maximum Recommended Current: 60 amps
Connector #1: Deans Male Ultra
Connector #2: Deans Female Ultra
Wire: None
Weight: 0.31 oz (8.67 g)
Back to top of page
Series Adapter 2 Deans Male Ultra to 1 Deans Female Ultra
Stock Number: GPMM3143 Usage: To connect two batteries with Deans Ultra Female connectors in Series to an ESC with a Deans Ultra Male connector.
Specifications:
Maximum Recommended Current: 60 amps
Connector #1: Deans Male Ultra
Connector #2: Deans Female Ultra
Wire: 12AWG 1.96" (50mm) long
Weight: 0.42 oz (11.87 g)
Back to top of page
Parallel Adapter 2 Deans Micro to 1 Deans Micro
Stock Number: GPMM3146 Usage: To connect two batteries with Deans Micro connectors in Parallel to an ESC with a Deans Micro.
Specifications:
Maximum Recommended Current: 15 amps
Connectors: Deans Micro
Wire: 16AWG 1.96" (50mm) long
Weight: 0.19 oz (5.3 g)
Back to top of page
Series Adapter 2 Deans Micro to 1 Deans Micro
Stock Number: GPMM3147 Usage: To connect two batteries with Deans Micro connectors in Series to an ESC with a Deans Micro.
Specifications:
Maximum Recommended Current: 15 amps
Connectors: Deans Micro
Wire: 16AWG 1.96" (50mm) long
Weight: 0.12 oz (3.5 g)
Back to top of page
Deans Micro to JST Male Adapter
Stock Number: GPMM3135 Usage: Connects a battery having a JST Female connector to an ESC having a Dean's Micro connector.
Specifications:
Maximum Recommended Current: 5 amps
Connector #1: Deans Micro, male pin is positive (+)
Connector #2: JST Male (male pins, female shell)
Wire: 20AWG 1.96" (50mm) long
Weight: 0.064 oz (1.82 g)
Back to top of page
Deans Micro to JST Female Adapter
Stock Number: GPMM3134 Usage: Connects a battery having a Dean's Micro connector to an ESC having a JST Male connector.
Specifications:
Maximum Recommended Current: 5 amps
Connector #1: Deans Micro, male pin is negative (-)
Connector #2: JST Female (female pins, male shell)
Wire: 20AWG 1.96" (50mm) long
Weight: 0.06 oz (1.62 g)
Back to top of page
Deans Male Ultra to Standard Male Adapter
Stock Number: GPMM3131 Usage: Connects a battery having a Dean's Female Ultra connector to an ESC having a Standard Female connector.
Specifications:
Maximum Recommended Current: 20 amps
Connector #1: Deans Male Ultra
Connector #2: Standard Male (male pins, female shell)
Wire: 14AWG 1.96" (50mm) long
Weight: 0.3 oz (8.37g)
Back to top of page
Deans Female Ultra to Standard Female Adapter
Stock Number: GPMM3130 Usage: Connects a battery having a Standard Male connector to an ESC having a Dean's Male Ultra connector.
Specifications:
Maximum Recommended Current: 20 amps
Connector #1: Deans Female Ultra
Connector #2: Standard Female (female pins, male shell)
Wire: 14AWG 1.96" (50mm) long
Weight: 0.28 oz (8g)
Back to top of page
Deans Micro to Deans Male Ultra Adapter
Stock Number: GPMM3127 Usage: Connects a battery having a Dean's Female Ultra connector to an ESC having a Dean's Micro connector.
Specifications:
Maximum Recommended Current: 15 amps
Connector #1: Dean's Micro, male pin is positive (+)
Connector #2: Dean's Male Ultra
Wire: None
Weight: 0.11 oz (3.18g)
Back to top of page
Deans Micro to Deans Female Ultra Adapter
Stock Number: GPMM3126 Usage: Connects a battery having a Dean's Micro connector to an ESC having a Dean's Ultra Male connector.
Specifications:
Maximum Recommended Current: 15 amps
Connector #1: Dean's Micro, male pin is negative (-)
Connector #2: Dean's Female Ultra
Wire: None
Weight: 0.1oz (2.9g)
Back to top of page
2-Pin to Standard Connector Adapter
Stock Number: GPMM3108 The adapter has a standard male Tamiya connector (with clip) on one end and a red male 2-pin BEC connector on the other end.
Usage: For connecting batteries having a standard connector to a charger having a 2-pin connector.
Specifications: Length: 101 mm (4")
Back to top of page
2-Pin to Banana Plug Charge Adapter
Stock Number: GPMM3105 One end has one red and one black male banana plug and the other end has male terminals with female red plasic shell (female 2-pin BEC).
Usage: Red plastic 2-pin connector is a (female) BEC type. Male banana plugs will plug into any female banana plug receptacle. One black (-) and one white (+) wire are both 24 gauge. One year quality guarantee.
Specifications: Length: 3.5" (89 mm) (overall tip to tip)
Back to top of page
Female Universal Connector Charge Adapter
Stock Number: GPMM3104 This is used for some Futaba Transmitters batteries which have the male- terminals with a female plastic shell (female Futaba J) connector.
Usage: Red plastic 2-pin connector is a (female) BEC type. Black plastic connector is a (male) Futaba J type. One black (-) and one white (+) wire are both 24 gauge. For the male universal connector charge adapter, use GPMM3103.
Specifications: Length: 3" (75 mm) (overall tip to tip)
Back to top of page
Male Universal Connector Charge Adapter
Stock Number: GPMM3103 This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a receiver battery pack that needs charging.
Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Black plastic connector is a (female) Futaba J type that will also accept Hitec, JR and Airtronics Z receiver battery connectors. Some transmitter batteries that have this same type of connector may be removed from the transmitter and charged the same way. One black (-) and one white (+) wire are both 24 gauge. For the female universal connector charge adapter, use GPMM3104.
Specifications: Length: 3" (75 mm) (overall tip to tip)
Back to top of page
Hitec/Air Tx Charge Adapter
Stock Number: GPMM3101 This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a Hitec/Airtronics transmitter charging jack to charge the transmitter battery.
Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Hitec/Airtronics transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.
Specifications: Length: 3" (75 mm) (overall tip to tip)
Back to top of page
Futaba Tx Charge Adapter
Stock Number: GPMM3100 This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a Futaba transmitter charging jack to charge the transmitter battery.
Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Futaba transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.
Specifications: Length: 3" (75 mm) (overall tip to tip)
Back to top of page
Equinox 2S/5S High Power Leads
Stock Number: GPMM3163 Usage: For charging or discharging between 3-6A through the Equinox.
Specifications:
Max Recommended Current: 6 amps
Compatible Input: ElectriFly Equinox LiPo Cell Balancer
Compatible Batteries: LiPo Batteries Wired for Balancing ONLY
Voltage Range: 2S, 3S, 4S and 5S (7.4V, 11.1V, 14.8V, 18.5V)
Balance Connector to Battery: JST XH Connector in Shrouded Header
Battery Power Connector: Deans Ultra Male
Back to top of page
Charge Lead Banana Plugs to Deans®Micro
Stock Number: GPMM3149 Usage: For charging a battery with a Dean's Micro connector.
Specifications:
Maximum Recommended Current: 10 amps
Connector #1: Banana Plugs
Connector #2: Dean's Micro, male pin is negative (-)
Wire: 16AWG 5.9" (150mm) long
Weight: 0.75 oz (21.15 g)
Back to top of page
Charge Lead Banana Plugs to Deans Male UltraTM
Stock Number: GPMM3148 Usage: For charging a battery with a Dean's Female Ultra connector.
Specifications:
Maximum Recommended Current: 10 amps
Connector #1: Banana Plugs
Connector #2: Dean's Male Ultra
Wire: 14AWG 5.9" (150mm) long
Weight: 0.93 oz (26.45 g)
Back to top of page
Charge Lead Banana Plugs/Heli-MaxTM Micro Plug
Stock Number: GPMM3150 Usage: For charging a battery with a Heli-Max Micro Plug.
Specifications:
Connector #1: Banana Plugs
Connector #2: Heli-Max Micro Plug
Wire: 24AWG 5.1" (130mm) long
Back to top of page
Female 2-Pin Red Connectors
Stock Number: GPMM3107 These are female 2-pin red connectors with 3" wires. For the male connectors with wire, use GPMM3106.
Usage: Designed to be used with most Park Flyer ElectriFly electronics. Wires are 24 gauge and pre-tinned at ends for easy soldering.
Specifications:
Length: 19 mm (overall)
Width: 7 mm
Height: 4 mm
Back to top of page
Male 2-Pin Red Connectors
Stock Number: GPMM3106 These are Male 2-Pin Red Connectors with 3" wires. For the female connectors with wire, use GPMM3107. This connector can be used to replace BEC-type connectors.
Usage: Designed to be used with most Park Flyer ElectriFly electronics. Red 2-pin connector is a BEC-style. Wires are 24 gauge and pre-tinned at ends for easy soldering. One year quality guarantee.
Specifications:
Length: 13 mm (overall with flanges)
Width: 5.5 mm
Height: 3 mm
Back to top of page
2 mm Male and Female Gold Plated Bullet Connectors
 
Stock Numbers:
GPMM3110 Male
GPMM3111 Female
Specifications:
Length: 0.59" (15 mm)
Inner Diameter: 0.079" (2 mm)
Outer Diameter: 0.097" (2.5 mm)
Back to top of page
3.5 mm Male and Female Gold Plated Bullet Connectors
Stock Numbers:
GPMM3112 Male
GPMM3113 Female
 
Specifications:
Length: 0.47" (12 mm)
Inner Diameter: 0.14" (3.5 mm)
Outer Diameter: 0.17" (4.25 mm)
Back to top of page
4 mm Male and Female Gold Plated Bullet Connectors
 
Stock Numbers:
GPMM3114 Male
GPMM3115 Female
Specifications:
Length: 0.83" (21 mm)
Inner Diameter: 0.16" (4 mm)
Outer Diameter: 0.19" (5 mm)
Back to top of page
6 mm Male and Female Gold Plated High Current Bullet Connectors
 
Stock Numbers:
GPMM3116 Male
GPMM3117 Female
Specifications:
Length: 0.6" (14 mm)
Outer Diameter: 0.2" (6 mm)
Back to top of page
2mm Male Bullet to 3.5mm Female Gold Plated Bullet Adapter
 Stock Number: GPMM3120
Specifications:
Weight: 0.03oz (0.95g)
Back to top of page
3.5mm Male Bullet to 4mm Female Gold Plated Bullet Adapter
 Stock Number: GPMM3121
Specifications:
Weight: 0.08oz (2.33g)
Back to top of page
3.5mm Male Bullet to 2mm Female Gold Plated Bullet Adapter
Stock Number: GPMM3122
Specifications:
Weight: 0.05oz (1.41g)
Back to top of page
4mm Male Bullet to 3.5mm Female Gold Plated Bullet Adapter
Stock Number: GPMM3123
Specifications:
Weight: 0.08oz (2.14g)
Back to top of page
4mm Male Bullet to 6mm Female Bullet Adapter
Stock Number: GPMM3118
Back to top of page
6mm Male Bullet to 4mm Female Bullet Adapter
Stock Number: GPMM3119
Back to top of page
Triton EQ Balance Board ElectriFly LiPo
Stock Number: GPMM3200
Usage: For use with the TritonEQ and the Triton2 EQ chargers.
Specifications:
Compatible Batteries: Electrifly batteries
Voltage Range: 2S to 6S (7.4V-22.2V)
Back to top of page
Triton EQ Balance Board FlightPower/ThunderPower
Stock Number: GPMM3201
Usage: For use with the TritonEQ and the Triton2 EQ chargers.
Specifications:
Compatible Batteries: FlightPower and Thunder Power LiPo batteries
Voltage Range: 2S to 6S (7.4V-22.2V)
Back to top of page
© 2000-2013 Hobbico, Inc. All rights reserved. Privacy Statement | Terms of Use
|
