An easy, affordable upgrade!
- Great for radical 3D maneuvers with flat foam airplanes!
- "Outrunner" design eliminates the need for an external gear drive, for easier installation and less all-up weight.
- Simply attach the prop to the motor with a rubber band (no prop adapter required); prop will simply "pop" off in the event of a crash.
- Very reliable and virtually maintenance-free.
- An exceptionally high power-to-weight ratio, and an efficiency rating of up to 77%.
- Comes with rubber bands and all necessary hardware.
| Internal Resistance |
No Load Current |
Input
Voltage |
kV Rating |
Max. Constant Current |
Max. Surge Current |
| 235 milli-ohms |
0.65A |
7.2-12V |
1000 rpm/volt |
11A |
15A |
Stock Number: GPMG4500
Each motor includes:
M 3 x 5 mm, round head mounting bolts - 3 each
M 2.6 x 10 mm, flat head hex key bolts - 2 each
Small #10 rubber bands - 6 each
Motor diameter and length: 28 x 29 mm (1.10 x 1.14")
Stainless steel output shaft diameter and length: 3.0 x 12 mm
Weight: 42 g (1.48 oz.)
Recommended brushless speed control for use with flat foam airplanes:
GPMM2070 ElectriFly BL-8 Brushless ESC 8 Amps
Download the manual
(49k PDF)
Copyright © 2004-2009 Hobbico, Inc. Privacy Statement | Terms of Use
All rights reserved. Do not duplicate or distribute in any form.
|
