Connectors and Adapters

Jump To:

2mm Male Bullet Adapter to JST Male Connector

Stock Number: GPMM3138

Usage: To connect a motor with a female JST Connector to an electronic speed control with 2mm female bullet connectors.

Specs:
Maximum Recommended Continuous Current: 5 amps-limited to the JST connector
Connector #1: 2mm Male Bullet
Connector #2 JST Male (Terminal Gender: Male/Housing Gender: Female)
Wire: 20AWG
Wire Length: 1.8" (45mm)
Weight: 0.08oz (2.29g)

2mm Female Bullet Adapter to JST Connector

Stock Number: GPMM3139

Usage: To connect a motor with 2mm Male Bullet Connectors to an electronic speed control with a JST Male Connector.

Specs:
Maximum Recommended Continuous Current: 5 amps-limited to the JST connector
Connector #1: 2mm Female Bullet
Connector #2 JST Female (Terminal Gender: Female/Housing Gender: Male)
Wire: 20AWG
Wire Length: 1.8" (45mm)
Weight: 0.07oz (2g)

Parallel Adapter 1 Deans Ultra Male to 2 Deans Ultra Female

Stock Number: GPMM3141

Usage: To connect two electronic speed controls with Deans Ultra Male connectors in parallel to a battery with a Deans Ultra Female connector.

Specs:
Maximum Recommended Current: 60 amps
Connector #1: Deans Male Ultra
Connector #2: Deans Female Ultra
Wire: None
Weight: 0.31 oz (8.79 g)

Parallel Adapter 2 Deans Male Ultra to 1 Deans Female Ultra

Stock Number: GPMM3142

Usage: To connect two batteries with Deans Ultra Female connectors in Parallel to an ESC with a Deans Ultra Male connector.

Specs:
Maximum Recommended Current: 60 amps
Connector #1: Deans Male Ultra
Connector #2: Deans Female Ultra
Wire: None
Weight: 0.31 oz (8.67 g)

Series Adapter 2 Deans Male Ultra to 1 Deans Female Ultra

Stock Number: GPMM3143

Usage: To connect two batteries with Deans Ultra Female connectors in Series to an ESC with a Deans Ultra Male connector.

Specs:
Maximum Recommended Current: 60 amps
Connector #1: Deans Male Ultra
Connector #2: Deans Female Ultra
Wire: 14AWG 1.96" (50mm) long
Weight: 0.42 oz (11.87 g)

Parallel Adapter 2 Deans Micro to 1 Deans Micro

Stock Number: GPMM3146

Usage: To connect two batteries with Deans Micro connectors in Parallel to an ESC with a Deans Micro.

Specs:
Maximum Recommended Current: 15 amps
Connectors: Deans Micro
Wire: 16AWG 1.96" (50mm) long
Weight: 0.19 oz (5.3 g)

Series Adapter 2 Deans Micro to 1 Deans Micro

Stock Number: GPMM3147

Usage: To connect two batteries with Deans Micro connectors in Series to an ESC with a Deans Micro.

Specs:
Maximum Recommended Current: 15 amps
Connectors: Deans Micro
Wire: 16AWG 1.96" (50mm) long
Weight: 0.12 oz (3.5 g)

Deans Micro to JST Male Adapter

Stock Number: GPMM3135

Usage: Connects a battery having a JST Female connector to an ESC having a Dean's Micro connector.

Specs:
Maximum Recommended Current: 5 amps
Connector #1: Deans Micro, male pin is positive (+)
Connector #2: JST Male (male pins, female shell)
Wire: 20AWG 1.96" (50mm) long
Weight: 0.064 oz (1.82 g)

Deans Micro to JST Female Adapter

Stock Number: GPMM3134

Usage: Connects a battery having a Dean's Micro connector to an ESC having a JST Male connector.

Specs:
Maximum Recommended Current: 5 amps
Connector #1: Deans Micro, male pin is negative (-)
Connector #2: JST Female (female pins, male shell)
Wire: 20AWG 1.96" (50mm) long
Weight: 0.06 oz (1.62 g)

Deans Male Ultra to Standard Male Adapter

Stock Number: GPMM3131

Usage: Connects a battery having a Dean's Female Ultra connector to an ESC having a Standard Female connector.

Specs:
Maximum Recommended Current: 20 amps
Connector #1: Deans Male Ultra
Connector #2: Standard Male (male pins, female shell)
Wire: 14AWG 1.96" (50mm) long
Weight: 0.3 oz (8.37g)

Deans Female Ultra to Standard Female Adapter

Stock Number: GPMM3130

Usage: Connects a battery having a Standard Male connector to an ESC having a Dean's Male Ultra connector.

Specs:
Maximum Recommended Current: 20 amps
Connector #1: Deans Female Ultra
Connector #2: Standard Female (female pins, male shell)
Wire: 14AWG 1.96" (50mm) long
Weight: 0.28 oz (8g)

Deans Micro to Deans Male Ultra Adapter

Stock Number: GPMM3127

Usage: Connects a battery having a Dean's Female Ultra connector to an ESC having a Dean's Micro connector.

Specs:
Maximum Recommended Current: 15 amps
Connector #1: Dean's Micro, male pin is positive (+)
Connector #2: Dean's Male Ultra
Wire: None
Weight: 0.11 oz (3.18g)

Deans Micro to Deans Female Ultra Adapter

Stock Number: GPMM3126

Usage: Connects a battery having a Dean's Micro connector to an ESC having a Dean's Ultra Male connector.

Specs:
Maximum Recommended Current: 15 amps
Connector #1: Dean's Micro, male pin is negative (-)
Connector #2: Dean's Female Ultra
Wire: None
Weight: 0.1oz (2.9g)

2-Pin to Standard Connector Adapter

Stock Number: GPMM3108

The adapter has a standard male Tamiya connector (with clip) on one end and a red male 2-pin BEC connector on the other end.

Usage: For connecting batteries having a standard connector to a charger having a 2-pin connector.

Specs: Length: 101 mm (4")

2-Pin to Banana Plug Charge Adapter

Stock Number: GPMM3105

One end has one red and one black male banana plug and the other end has male terminals with female red plasic shell (female 2-pin BEC).

Usage: Red plastic 2-pin connector is a (female) BEC type. Male banana plugs will plug into any female banana plug receptacle. One black (-) and one white (+) wire are both 24 gauge. One year quality guarantee.

Specs: Length: 3.5" (89 mm) (overall tip to tip)

Female Universal Connector Charge Adapter

Stock Number: GPMM3104

This is used for some Futaba Transmitters batteries which have the male- terminals with a female plastic shell (female Futaba J) connector.

Usage: Red plastic 2-pin connector is a (female) BEC type. Black plastic connector is a (male) Futaba J type. One black (-) and one white (+) wire are both 24 gauge. For the male universal connector charge adapter, use GPMM3103.

Specs: Length: 3" (75 mm) (overall tip to tip)

Male Universal Connector Charge Adapter

Stock Number: GPMM3103

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a receiver battery pack that needs charging.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Black plastic connector is a (female) Futaba J type that will also accept Hitec, JR and Airtronics Z receiver battery connectors. Some transmitter batteries that have this same type of connector may be removed from the transmitter and charged the same way. One black (-) and one white (+) wire are both 24 gauge. For the female universal connector charge adapter, use GPMM3104.

Specs: Length: 3" (75 mm) (overall tip to tip)

JR Transmitter Charge Adapter

Stock Number: GPMM3102

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a JR transmitter charging jack to charge the transmitter battery.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. JR transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.

Specs: Length: 3" (75 mm) (overall tip to tip)

Hitec/Air Tx Charge Adapter

Stock Number: GPMM3101

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a Hitec/Airtronics transmitter charging jack to charge the transmitter battery.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Hitec/Airtronics transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.

Specs: Length: 3" (75 mm) (overall tip to tip)

Futaba Tx Charge Adapter

Stock Number: GPMM3100

This adapter is designed to go between the ElectriFly Peak Charger (GPMM3000), and a Futaba transmitter charging jack to charge the transmitter battery.

Usage: Red plastic 2-pin connector is a (male) BEC type that plugs into the ElectriFly Peak Charger connector. Futaba transmitter charging plug is round and plugs into the transmitter case. One black (-) and one white (+) wire are both 24 gauge.

Specs: Length: 3" (75 mm) (overall tip to tip)

Charge Lead Banana Plugs to Deans^®Micro

Stock Number: GPMM3149

Usage: For charging a battery with a Dean's Micro connector.

Specs:
Maximum Recommended Current: 10 amps
Connector #1: Banana Plugs
Connector #2: Dean's Micro, male pin is negative (-)
Wire: 16AWG 5.9" (150mm) long
Weight: 0.75 oz (21.15 g)

Charge Lead Banana Plugs to Deans Male Ultra^TM

Stock Number: GPMM3148

Usage: For charging a battery with a Dean's Female Ultra connector.

Specs:
Maximum Recommended Current: 10 amps
Connector #1: Banana Plugs
Connector #2: Dean's Male Ultra
Wire: 14AWG 5.9" (150mm) long
Weight: 0.93 oz (26.45 g)

Female 2-Pin Red Connectors

Stock Number: GPMM3107

These are female 2-pin red connectors with 3" wires. For the male connectors with wire, use GPMM3106.

Usage: Designed to be used with most Park Flyer ElectriFly electronics. Wires are 24 gauge and pre-tinned at ends for easy soldering.

Specs:
Length: 19 mm (overall)
Width: 7 mm
Height: 4 mm

Male 2-Pin Red Connectors

Stock Number: GPMM3106

These are Male 2-Pin Red Connectors with 3" wires. For the female connectors with wire, use GPMM3107. This connector can be used to replace BEC-type connectors.

Usage: Designed to be used with most Park Flyer ElectriFly electronics. Red 2-pin connector is a BEC-style. Wires are 24 gauge and pre-tinned at ends for easy soldering. One year quality guarantee.

Specs:
Length: 13 mm (overall with flanges)
Width: 5.5 mm
Height: 3 mm